Floors we clean in Chicago buildings
| Surface | Regular care | Deeper work |
|---|---|---|
| Vinyl composition tile (VCT) | Dust mop, damp mop | Scrub and recoat, burnish, strip and refinish |
| Luxury vinyl plank | Dust mop, damp mop with a neutral cleaner | Machine scrub, no finish and no burnishing |
| Ceramic and porcelain tile | Mop | Machine scrub, grout cleaning |
| Stone and terrazzo | Dust mop, neutral cleaner | Scrub and polish to suit the stone |
| Sealed concrete | Dust mop, auto-scrub | Deep scrub in traffic lanes |
| Carpet and carpet tile | Vacuum, spot treatment | Extraction by zone |
Why floors need their own schedule
Regular janitorial service keeps floors swept, vacuumed and mopped. Scrubbing, burnishing and extraction remove what that cannot, and they need machines, drying time and an empty room. Planned on their own dates, they get done, instead of waiting for a quiet night that never comes.
Floor stripping and waxing
Stripping removes every old layer of floor finish from vinyl tile, and waxing is the common name for laying new coats of finish on top. It is the heaviest floor job, which is why it should be rare. A floor that is scrubbed and given a fresh top coat regularly keeps its shine and puts off the next full strip.
When we look at your floors, we check how much finish is left and how worn it is, and tell you whether it needs a full strip or whether a scrub and recoat will do. A vinyl tile floor laid in a build-out gets cleaned and finished as part of post-construction cleaning before anyone moves in.
Carpet extraction
Vacuuming removes dry dirt. Extraction, which flushes the carpet with hot water and pulls it back out, removes what is stuck to the fibers. Entrances and main corridors need it most often, open office areas less often and private offices least. Spots are treated in between so they do not set. Our commercial carpet cleaning page covers carpet on its own, including salt season and drying time.
Signs your floors need attention
- Hard floors look dull or gray even right after they are mopped.
- There is a dark path down the middle of corridors and in front of elevators.
- White salt film shows up at the entrances every winter.
- Carpet near the doors and the coffee area stays stained after vacuuming.
- Nobody can remember when the floors were last stripped or extracted.
- One company cleans at night and another does the floors, and each blames the other for the lobby.
Floor work can come from the same company as your nightly cleaning, so one company answers for how the floors look.
Salt season in Chicago
From November to March, salt and slush come through every door. Salt leaves a white film on hard floors, wears through floor finish and stiffens carpet. The plan for winter is simple:
- Longer entry mats, vacuumed or swapped more often.
- Entrance floors mopped on every visit with a neutral cleaner that lifts salt film.
- More frequent scrubbing through the winter months.
- A scrub and recoat in spring, once the salt is gone.
Suburban buildings with their own parking lots, like many in Des Plaines, take in the most salt. Downtown lobbies in the Chicago Loop take in the most feet. Many older Chicago lobbies have stone or terrazzo, which needs very different care from the sealed concrete in a warehouse office.
Floors in different buildings
Medical waiting rooms, warehouse offices and multi-tenant lobbies each wear differently. See medical office cleaning, warehouse and industrial cleaning and property management cleaning for how floor work fits those buildings.
One project or a regular schedule
Floor work can be a single job, such as a strip and refinish before a tenant moves in, or a regular part of your cleaning. Book a site assessment and we will look at each surface with you and tell you what it needs.

